+ * setKey('12345678901234567890123456789012');
+ *
+ * $plaintext = str_repeat('a', 1024);
+ *
+ * echo $blowfish->decrypt($blowfish->encrypt($plaintext));
+ * ?>
+ *
+ *
+ * @author Jim Wigginton
+ * echo $rijndael->encrypt(substr($plaintext, 0, 16));
+ * echo $rijndael->encrypt(substr($plaintext, 16, 16));
+ *
+ *
+ * echo $rijndael->encrypt($plaintext);
+ *
+ *
+ * The solution is to enable the continuous buffer. Although this will resolve the above discrepancy, it creates
+ * another, as demonstrated with the following:
+ *
+ *
+ * $rijndael->encrypt(substr($plaintext, 0, 16));
+ * echo $rijndael->decrypt($rijndael->encrypt(substr($plaintext, 16, 16)));
+ *
+ *
+ * echo $rijndael->decrypt($rijndael->encrypt(substr($plaintext, 16, 16)));
+ *
+ *
+ * With the continuous buffer disabled, these would yield the same output. With it enabled, they yield different
+ * outputs. The reason is due to the fact that the initialization vector's change after every encryption /
+ * decryption round when the continuous buffer is enabled. When it's disabled, they remain constant.
+ *
+ * Put another way, when the continuous buffer is enabled, the state of the \phpseclib3\Crypt\*() object changes after each
+ * encryption / decryption round, whereas otherwise, it'd remain constant. For this reason, it's recommended that
+ * continuous buffers not be used. They do offer better security and are, in fact, sometimes required (SSH uses them),
+ * however, they are also less intuitive and more likely to cause you problems.
+ *
+ * {@internal Could, but not must, extend by the child Crypt_* class}
+ *
+ * @see self::disableContinuousBuffer()
+ */
+ public function enableContinuousBuffer()
+ {
+ if ($this->mode == self::MODE_ECB) {
+ return;
+ }
+
+ if ($this->mode == self::MODE_GCM) {
+ throw new \BadMethodCallException('This mode does not run in continuous mode');
+ }
+
+ $this->continuousBuffer = true;
+
+ $this->setEngine();
+ }
+
+ /**
+ * Treat consecutive packets as if they are a discontinuous buffer.
+ *
+ * The default behavior.
+ *
+ * {@internal Could, but not must, extend by the child Crypt_* class}
+ *
+ * @see self::enableContinuousBuffer()
+ */
+ public function disableContinuousBuffer()
+ {
+ if ($this->mode == self::MODE_ECB) {
+ return;
+ }
+ if (!$this->continuousBuffer) {
+ return;
+ }
+
+ $this->continuousBuffer = false;
+
+ $this->setEngine();
+ }
+
+ /**
+ * Test for engine validity
+ *
+ * @see self::__construct()
+ * @param int $engine
+ * @return bool
+ */
+ protected function isValidEngineHelper($engine)
+ {
+ switch ($engine) {
+ case self::ENGINE_OPENSSL:
+ $this->openssl_emulate_ctr = false;
+ $result = $this->cipher_name_openssl &&
+ extension_loaded('openssl');
+ if (!$result) {
+ return false;
+ }
+
+ $methods = openssl_get_cipher_methods();
+ if (in_array($this->cipher_name_openssl, $methods)) {
+ return true;
+ }
+ // not all of openssl's symmetric cipher's support ctr. for those
+ // that don't we'll emulate it
+ switch ($this->mode) {
+ case self::MODE_CTR:
+ if (in_array($this->cipher_name_openssl_ecb, $methods)) {
+ $this->openssl_emulate_ctr = true;
+ return true;
+ }
+ }
+ return false;
+ case self::ENGINE_MCRYPT:
+ set_error_handler(function () {
+ });
+ $result = $this->cipher_name_mcrypt &&
+ extension_loaded('mcrypt') &&
+ in_array($this->cipher_name_mcrypt, mcrypt_list_algorithms());
+ restore_error_handler();
+ return $result;
+ case self::ENGINE_EVAL:
+ return method_exists($this, 'setupInlineCrypt');
+ case self::ENGINE_INTERNAL:
+ return true;
+ }
+
+ return false;
+ }
+
+ /**
+ * Test for engine validity
+ *
+ * @see self::__construct()
+ * @param string $engine
+ * @return bool
+ */
+ public function isValidEngine($engine)
+ {
+ static $reverseMap;
+ if (!isset($reverseMap)) {
+ $reverseMap = array_map('strtolower', self::ENGINE_MAP);
+ $reverseMap = array_flip($reverseMap);
+ }
+ $engine = strtolower($engine);
+ if (!isset($reverseMap[$engine])) {
+ return false;
+ }
+
+ return $this->isValidEngineHelper($reverseMap[$engine]);
+ }
+
+ /**
+ * Sets the preferred crypt engine
+ *
+ * Currently, $engine could be:
+ *
+ * - libsodium[very fast]
+ *
+ * - OpenSSL [very fast]
+ *
+ * - mcrypt [fast]
+ *
+ * - Eval [slow]
+ *
+ * - PHP [slowest]
+ *
+ * If the preferred crypt engine is not available the fastest available one will be used
+ *
+ * @see self::__construct()
+ * @param string $engine
+ */
+ public function setPreferredEngine($engine)
+ {
+ static $reverseMap;
+ if (!isset($reverseMap)) {
+ $reverseMap = array_map('strtolower', self::ENGINE_MAP);
+ $reverseMap = array_flip($reverseMap);
+ }
+ $engine = is_string($engine) ? strtolower($engine) : '';
+ $this->preferredEngine = isset($reverseMap[$engine]) ? $reverseMap[$engine] : self::ENGINE_LIBSODIUM;
+
+ $this->setEngine();
+ }
+
+ /**
+ * Returns the engine currently being utilized
+ *
+ * @see self::setEngine()
+ */
+ public function getEngine()
+ {
+ return self::ENGINE_MAP[$this->engine];
+ }
+
+ /**
+ * Sets the engine as appropriate
+ *
+ * @see self::__construct()
+ */
+ protected function setEngine()
+ {
+ $this->engine = null;
+
+ $candidateEngines = [
+ self::ENGINE_LIBSODIUM,
+ self::ENGINE_OPENSSL_GCM,
+ self::ENGINE_OPENSSL,
+ self::ENGINE_MCRYPT,
+ self::ENGINE_EVAL
+ ];
+ if (isset($this->preferredEngine)) {
+ $temp = [$this->preferredEngine];
+ $candidateEngines = array_merge(
+ $temp,
+ array_diff($candidateEngines, $temp)
+ );
+ }
+ foreach ($candidateEngines as $engine) {
+ if ($this->isValidEngineHelper($engine)) {
+ $this->engine = $engine;
+ break;
+ }
+ }
+ if (!$this->engine) {
+ $this->engine = self::ENGINE_INTERNAL;
+ }
+
+ if ($this->engine != self::ENGINE_MCRYPT && $this->enmcrypt) {
+ set_error_handler(function () {
+ });
+ // Closing the current mcrypt resource(s). _mcryptSetup() will, if needed,
+ // (re)open them with the module named in $this->cipher_name_mcrypt
+ mcrypt_module_close($this->enmcrypt);
+ mcrypt_module_close($this->demcrypt);
+ $this->enmcrypt = null;
+ $this->demcrypt = null;
+
+ if ($this->ecb) {
+ mcrypt_module_close($this->ecb);
+ $this->ecb = null;
+ }
+ restore_error_handler();
+ }
+
+ $this->changed = $this->nonIVChanged = true;
+ }
+
+ /**
+ * Encrypts a block
+ *
+ * Note: Must be extended by the child \phpseclib3\Crypt\* class
+ *
+ * @param string $in
+ * @return string
+ */
+ abstract protected function encryptBlock($in);
+
+ /**
+ * Decrypts a block
+ *
+ * Note: Must be extended by the child \phpseclib3\Crypt\* class
+ *
+ * @param string $in
+ * @return string
+ */
+ abstract protected function decryptBlock($in);
+
+ /**
+ * Setup the key (expansion)
+ *
+ * Only used if $engine == self::ENGINE_INTERNAL
+ *
+ * Note: Must extend by the child \phpseclib3\Crypt\* class
+ *
+ * @see self::setup()
+ */
+ abstract protected function setupKey();
+
+ /**
+ * Setup the self::ENGINE_INTERNAL $engine
+ *
+ * (re)init, if necessary, the internal cipher $engine and flush all $buffers
+ * Used (only) if $engine == self::ENGINE_INTERNAL
+ *
+ * _setup() will be called each time if $changed === true
+ * typically this happens when using one or more of following public methods:
+ *
+ * - setKey()
+ *
+ * - setIV()
+ *
+ * - disableContinuousBuffer()
+ *
+ * - First run of encrypt() / decrypt() with no init-settings
+ *
+ * {@internal setup() is always called before en/decryption.}
+ *
+ * {@internal Could, but not must, extend by the child Crypt_* class}
+ *
+ * @see self::setKey()
+ * @see self::setIV()
+ * @see self::disableContinuousBuffer()
+ */
+ protected function setup()
+ {
+ if (!$this->changed) {
+ return;
+ }
+
+ $this->changed = false;
+
+ if ($this->usePoly1305 && !isset($this->poly1305Key) && method_exists($this, 'createPoly1305Key')) {
+ $this->createPoly1305Key();
+ }
+
+ $this->enbuffer = $this->debuffer = ['ciphertext' => '', 'xor' => '', 'pos' => 0, 'enmcrypt_init' => true];
+ //$this->newtag = $this->oldtag = false;
+
+ if ($this->usesNonce()) {
+ if ($this->nonce === false) {
+ throw new InsufficientSetupException('No nonce has been defined');
+ }
+ if ($this->mode == self::MODE_GCM && !in_array($this->engine, [self::ENGINE_LIBSODIUM, self::ENGINE_OPENSSL_GCM])) {
+ $this->setupGCM();
+ }
+ } else {
+ $this->iv = $this->origIV;
+ }
+
+ if ($this->iv === false && !in_array($this->mode, [self::MODE_STREAM, self::MODE_ECB])) {
+ if ($this->mode != self::MODE_GCM || !in_array($this->engine, [self::ENGINE_LIBSODIUM, self::ENGINE_OPENSSL_GCM])) {
+ throw new InsufficientSetupException('No IV has been defined');
+ }
+ }
+
+ if ($this->key === false) {
+ throw new InsufficientSetupException('No key has been defined');
+ }
+
+ $this->encryptIV = $this->decryptIV = $this->iv;
+
+ switch ($this->engine) {
+ case self::ENGINE_MCRYPT:
+ $this->enchanged = $this->dechanged = true;
+
+ set_error_handler(function () {
+ });
+
+ if (!isset($this->enmcrypt)) {
+ static $mcrypt_modes = [
+ self::MODE_CTR => 'ctr',
+ self::MODE_ECB => MCRYPT_MODE_ECB,
+ self::MODE_CBC => MCRYPT_MODE_CBC,
+ self::MODE_CFB => 'ncfb',
+ self::MODE_CFB8 => MCRYPT_MODE_CFB,
+ self::MODE_OFB => MCRYPT_MODE_NOFB,
+ self::MODE_OFB8 => MCRYPT_MODE_OFB,
+ self::MODE_STREAM => MCRYPT_MODE_STREAM,
+ ];
+
+ $this->demcrypt = mcrypt_module_open($this->cipher_name_mcrypt, '', $mcrypt_modes[$this->mode], '');
+ $this->enmcrypt = mcrypt_module_open($this->cipher_name_mcrypt, '', $mcrypt_modes[$this->mode], '');
+
+ // we need the $ecb mcrypt resource (only) in MODE_CFB with enableContinuousBuffer()
+ // to workaround mcrypt's broken ncfb implementation in buffered mode
+ // see: {@link http://phpseclib.sourceforge.net/cfb-demo.phps}
+ if ($this->mode == self::MODE_CFB) {
+ $this->ecb = mcrypt_module_open($this->cipher_name_mcrypt, '', MCRYPT_MODE_ECB, '');
+ }
+ } // else should mcrypt_generic_deinit be called?
+
+ if ($this->mode == self::MODE_CFB) {
+ mcrypt_generic_init($this->ecb, $this->key, str_repeat("\0", $this->block_size));
+ }
+
+ restore_error_handler();
+
+ break;
+ case self::ENGINE_INTERNAL:
+ $this->setupKey();
+ break;
+ case self::ENGINE_EVAL:
+ if ($this->nonIVChanged) {
+ $this->setupKey();
+ $this->setupInlineCrypt();
+ }
+ }
+
+ $this->nonIVChanged = false;
+ }
+
+ /**
+ * Pads a string
+ *
+ * Pads a string using the RSA PKCS padding standards so that its length is a multiple of the blocksize.
+ * $this->block_size - (strlen($text) % $this->block_size) bytes are added, each of which is equal to
+ * chr($this->block_size - (strlen($text) % $this->block_size)
+ *
+ * If padding is disabled and $text is not a multiple of the blocksize, the string will be padded regardless
+ * and padding will, hence forth, be enabled.
+ *
+ * @see self::unpad()
+ * @param string $text
+ * @throws \LengthException if padding is disabled and the plaintext's length is not a multiple of the block size
+ * @return string
+ */
+ protected function pad($text)
+ {
+ $length = strlen($text);
+
+ if (!$this->padding) {
+ if ($length % $this->block_size == 0) {
+ return $text;
+ } else {
+ throw new \LengthException("The plaintext's length ($length) is not a multiple of the block size ({$this->block_size}). Try enabling padding.");
+ }
+ }
+
+ $pad = $this->block_size - ($length % $this->block_size);
+
+ return str_pad($text, $length + $pad, chr($pad));
+ }
+
+ /**
+ * Unpads a string.
+ *
+ * If padding is enabled and the reported padding length is invalid the encryption key will be assumed to be wrong
+ * and false will be returned.
+ *
+ * @see self::pad()
+ * @param string $text
+ * @throws \LengthException if the ciphertext's length is not a multiple of the block size
+ * @return string
+ */
+ protected function unpad($text)
+ {
+ if (!$this->padding) {
+ return $text;
+ }
+
+ $length = ord($text[strlen($text) - 1]);
+
+ if (!$length || $length > $this->block_size) {
+ throw new BadDecryptionException("The ciphertext has an invalid padding length ($length) compared to the block size ({$this->block_size})");
+ }
+
+ return substr($text, 0, -$length);
+ }
+
+ /**
+ * Setup the performance-optimized function for de/encrypt()
+ *
+ * Stores the created (or existing) callback function-name
+ * in $this->inline_crypt
+ *
+ * Internally for phpseclib developers:
+ *
+ * _setupInlineCrypt() would be called only if:
+ *
+ * - $this->engine === self::ENGINE_EVAL
+ *
+ * - each time on _setup(), after(!) _setupKey()
+ *
+ *
+ * This ensures that _setupInlineCrypt() has always a
+ * full ready2go initializated internal cipher $engine state
+ * where, for example, the keys already expanded,
+ * keys/block_size calculated and such.
+ *
+ * It is, each time if called, the responsibility of _setupInlineCrypt():
+ *
+ * - to set $this->inline_crypt to a valid and fully working callback function
+ * as a (faster) replacement for encrypt() / decrypt()
+ *
+ * - NOT to create unlimited callback functions (for memory reasons!)
+ * no matter how often _setupInlineCrypt() would be called. At some
+ * point of amount they must be generic re-useable.
+ *
+ * - the code of _setupInlineCrypt() it self,
+ * and the generated callback code,
+ * must be, in following order:
+ * - 100% safe
+ * - 100% compatible to encrypt()/decrypt()
+ * - using only php5+ features/lang-constructs/php-extensions if
+ * compatibility (down to php4) or fallback is provided
+ * - readable/maintainable/understandable/commented and... not-cryptic-styled-code :-)
+ * - >= 10% faster than encrypt()/decrypt() [which is, by the way,
+ * the reason for the existence of _setupInlineCrypt() :-)]
+ * - memory-nice
+ * - short (as good as possible)
+ *
+ * Note: - _setupInlineCrypt() is using _createInlineCryptFunction() to create the full callback function code.
+ * - In case of using inline crypting, _setupInlineCrypt() must extend by the child \phpseclib3\Crypt\* class.
+ * - The following variable names are reserved:
+ * - $_* (all variable names prefixed with an underscore)
+ * - $self (object reference to it self. Do not use $this, but $self instead)
+ * - $in (the content of $in has to en/decrypt by the generated code)
+ * - The callback function should not use the 'return' statement, but en/decrypt'ing the content of $in only
+ *
+ * {@internal If a Crypt_* class providing inline crypting it must extend _setupInlineCrypt()}
+ *
+ * @see self::setup()
+ * @see self::createInlineCryptFunction()
+ * @see self::encrypt()
+ * @see self::decrypt()
+ */
+ //protected function setupInlineCrypt();
+
+ /**
+ * Creates the performance-optimized function for en/decrypt()
+ *
+ * Internally for phpseclib developers:
+ *
+ * _createInlineCryptFunction():
+ *
+ * - merge the $cipher_code [setup'ed by _setupInlineCrypt()]
+ * with the current [$this->]mode of operation code
+ *
+ * - create the $inline function, which called by encrypt() / decrypt()
+ * as its replacement to speed up the en/decryption operations.
+ *
+ * - return the name of the created $inline callback function
+ *
+ * - used to speed up en/decryption
+ *
+ *
+ *
+ * The main reason why can speed up things [up to 50%] this way are:
+ *
+ * - using variables more effective then regular.
+ * (ie no use of expensive arrays but integers $k_0, $k_1 ...
+ * or even, for example, the pure $key[] values hardcoded)
+ *
+ * - avoiding 1000's of function calls of ie _encryptBlock()
+ * but inlining the crypt operations.
+ * in the mode of operation for() loop.
+ *
+ * - full loop unroll the (sometimes key-dependent) rounds
+ * avoiding this way ++$i counters and runtime-if's etc...
+ *
+ * The basic code architectur of the generated $inline en/decrypt()
+ * lambda function, in pseudo php, is:
+ *
+ *
+ * +----------------------------------------------------------------------------------------------+
+ * | callback $inline = create_function: |
+ * | lambda_function_0001_crypt_ECB($action, $text) |
+ * | { |
+ * | INSERT PHP CODE OF: |
+ * | $cipher_code['init_crypt']; // general init code. |
+ * | // ie: $sbox'es declarations used for |
+ * | // encrypt and decrypt'ing. |
+ * | |
+ * | switch ($action) { |
+ * | case 'encrypt': |
+ * | INSERT PHP CODE OF: |
+ * | $cipher_code['init_encrypt']; // encrypt sepcific init code. |
+ * | ie: specified $key or $box |
+ * | declarations for encrypt'ing. |
+ * | |
+ * | foreach ($ciphertext) { |
+ * | $in = $block_size of $ciphertext; |
+ * | |
+ * | INSERT PHP CODE OF: |
+ * | $cipher_code['encrypt_block']; // encrypt's (string) $in, which is always: |
+ * | // strlen($in) == $this->block_size |
+ * | // here comes the cipher algorithm in action |
+ * | // for encryption. |
+ * | // $cipher_code['encrypt_block'] has to |
+ * | // encrypt the content of the $in variable |
+ * | |
+ * | $plaintext .= $in; |
+ * | } |
+ * | return $plaintext; |
+ * | |
+ * | case 'decrypt': |
+ * | INSERT PHP CODE OF: |
+ * | $cipher_code['init_decrypt']; // decrypt sepcific init code |
+ * | ie: specified $key or $box |
+ * | declarations for decrypt'ing. |
+ * | foreach ($plaintext) { |
+ * | $in = $block_size of $plaintext; |
+ * | |
+ * | INSERT PHP CODE OF: |
+ * | $cipher_code['decrypt_block']; // decrypt's (string) $in, which is always |
+ * | // strlen($in) == $this->block_size |
+ * | // here comes the cipher algorithm in action |
+ * | // for decryption. |
+ * | // $cipher_code['decrypt_block'] has to |
+ * | // decrypt the content of the $in variable |
+ * | $ciphertext .= $in; |
+ * | } |
+ * | return $ciphertext; |
+ * | } |
+ * | } |
+ * +----------------------------------------------------------------------------------------------+
+ *
+ *
+ * See also the \phpseclib3\Crypt\*::_setupInlineCrypt()'s for
+ * productive inline $cipher_code's how they works.
+ *
+ * Structure of:
+ *
+ * $cipher_code = [
+ * 'init_crypt' => (string) '', // optional
+ * 'init_encrypt' => (string) '', // optional
+ * 'init_decrypt' => (string) '', // optional
+ * 'encrypt_block' => (string) '', // required
+ * 'decrypt_block' => (string) '' // required
+ * ];
+ *
+ *
+ * @see self::setupInlineCrypt()
+ * @see self::encrypt()
+ * @see self::decrypt()
+ * @param array $cipher_code
+ * @return string (the name of the created callback function)
+ */
+ protected function createInlineCryptFunction($cipher_code)
+ {
+ $block_size = $this->block_size;
+
+ // optional
+ $init_crypt = isset($cipher_code['init_crypt']) ? $cipher_code['init_crypt'] : '';
+ $init_encrypt = isset($cipher_code['init_encrypt']) ? $cipher_code['init_encrypt'] : '';
+ $init_decrypt = isset($cipher_code['init_decrypt']) ? $cipher_code['init_decrypt'] : '';
+ // required
+ $encrypt_block = $cipher_code['encrypt_block'];
+ $decrypt_block = $cipher_code['decrypt_block'];
+
+ // Generating mode of operation inline code,
+ // merged with the $cipher_code algorithm
+ // for encrypt- and decryption.
+ switch ($this->mode) {
+ case self::MODE_ECB:
+ $encrypt = $init_encrypt . '
+ $_ciphertext = "";
+ $_plaintext_len = strlen($_text);
+
+ for ($_i = 0; $_i < $_plaintext_len; $_i+= ' . $block_size . ') {
+ $in = substr($_text, $_i, ' . $block_size . ');
+ ' . $encrypt_block . '
+ $_ciphertext.= $in;
+ }
+
+ return $_ciphertext;
+ ';
+
+ $decrypt = $init_decrypt . '
+ $_plaintext = "";
+ $_text = str_pad($_text, strlen($_text) + (' . $block_size . ' - strlen($_text) % ' . $block_size . ') % ' . $block_size . ', chr(0));
+ $_ciphertext_len = strlen($_text);
+
+ for ($_i = 0; $_i < $_ciphertext_len; $_i+= ' . $block_size . ') {
+ $in = substr($_text, $_i, ' . $block_size . ');
+ ' . $decrypt_block . '
+ $_plaintext.= $in;
+ }
+
+ return $this->unpad($_plaintext);
+ ';
+ break;
+ case self::MODE_CTR:
+ $encrypt = $init_encrypt . '
+ $_ciphertext = "";
+ $_plaintext_len = strlen($_text);
+ $_xor = $this->encryptIV;
+ $_buffer = &$this->enbuffer;
+ if (strlen($_buffer["ciphertext"])) {
+ for ($_i = 0; $_i < $_plaintext_len; $_i+= ' . $block_size . ') {
+ $_block = substr($_text, $_i, ' . $block_size . ');
+ if (strlen($_block) > strlen($_buffer["ciphertext"])) {
+ $in = $_xor;
+ ' . $encrypt_block . '
+ \phpseclib3\Common\Functions\Strings::increment_str($_xor);
+ $_buffer["ciphertext"].= $in;
+ }
+ $_key = \phpseclib3\Common\Functions\Strings::shift($_buffer["ciphertext"], ' . $block_size . ');
+ $_ciphertext.= $_block ^ $_key;
+ }
+ } else {
+ for ($_i = 0; $_i < $_plaintext_len; $_i+= ' . $block_size . ') {
+ $_block = substr($_text, $_i, ' . $block_size . ');
+ $in = $_xor;
+ ' . $encrypt_block . '
+ \phpseclib3\Common\Functions\Strings::increment_str($_xor);
+ $_key = $in;
+ $_ciphertext.= $_block ^ $_key;
+ }
+ }
+ if ($this->continuousBuffer) {
+ $this->encryptIV = $_xor;
+ if ($_start = $_plaintext_len % ' . $block_size . ') {
+ $_buffer["ciphertext"] = substr($_key, $_start) . $_buffer["ciphertext"];
+ }
+ }
+
+ return $_ciphertext;
+ ';
+
+ $decrypt = $init_encrypt . '
+ $_plaintext = "";
+ $_ciphertext_len = strlen($_text);
+ $_xor = $this->decryptIV;
+ $_buffer = &$this->debuffer;
+
+ if (strlen($_buffer["ciphertext"])) {
+ for ($_i = 0; $_i < $_ciphertext_len; $_i+= ' . $block_size . ') {
+ $_block = substr($_text, $_i, ' . $block_size . ');
+ if (strlen($_block) > strlen($_buffer["ciphertext"])) {
+ $in = $_xor;
+ ' . $encrypt_block . '
+ \phpseclib3\Common\Functions\Strings::increment_str($_xor);
+ $_buffer["ciphertext"].= $in;
+ }
+ $_key = \phpseclib3\Common\Functions\Strings::shift($_buffer["ciphertext"], ' . $block_size . ');
+ $_plaintext.= $_block ^ $_key;
+ }
+ } else {
+ for ($_i = 0; $_i < $_ciphertext_len; $_i+= ' . $block_size . ') {
+ $_block = substr($_text, $_i, ' . $block_size . ');
+ $in = $_xor;
+ ' . $encrypt_block . '
+ \phpseclib3\Common\Functions\Strings::increment_str($_xor);
+ $_key = $in;
+ $_plaintext.= $_block ^ $_key;
+ }
+ }
+ if ($this->continuousBuffer) {
+ $this->decryptIV = $_xor;
+ if ($_start = $_ciphertext_len % ' . $block_size . ') {
+ $_buffer["ciphertext"] = substr($_key, $_start) . $_buffer["ciphertext"];
+ }
+ }
+
+ return $_plaintext;
+ ';
+ break;
+ case self::MODE_CFB:
+ $encrypt = $init_encrypt . '
+ $_ciphertext = "";
+ $_buffer = &$this->enbuffer;
+
+ if ($this->continuousBuffer) {
+ $_iv = &$this->encryptIV;
+ $_pos = &$_buffer["pos"];
+ } else {
+ $_iv = $this->encryptIV;
+ $_pos = 0;
+ }
+ $_len = strlen($_text);
+ $_i = 0;
+ if ($_pos) {
+ $_orig_pos = $_pos;
+ $_max = ' . $block_size . ' - $_pos;
+ if ($_len >= $_max) {
+ $_i = $_max;
+ $_len-= $_max;
+ $_pos = 0;
+ } else {
+ $_i = $_len;
+ $_pos+= $_len;
+ $_len = 0;
+ }
+ $_ciphertext = substr($_iv, $_orig_pos) ^ $_text;
+ $_iv = substr_replace($_iv, $_ciphertext, $_orig_pos, $_i);
+ }
+ while ($_len >= ' . $block_size . ') {
+ $in = $_iv;
+ ' . $encrypt_block . ';
+ $_iv = $in ^ substr($_text, $_i, ' . $block_size . ');
+ $_ciphertext.= $_iv;
+ $_len-= ' . $block_size . ';
+ $_i+= ' . $block_size . ';
+ }
+ if ($_len) {
+ $in = $_iv;
+ ' . $encrypt_block . '
+ $_iv = $in;
+ $_block = $_iv ^ substr($_text, $_i);
+ $_iv = substr_replace($_iv, $_block, 0, $_len);
+ $_ciphertext.= $_block;
+ $_pos = $_len;
+ }
+ return $_ciphertext;
+ ';
+
+ $decrypt = $init_encrypt . '
+ $_plaintext = "";
+ $_buffer = &$this->debuffer;
+
+ if ($this->continuousBuffer) {
+ $_iv = &$this->decryptIV;
+ $_pos = &$_buffer["pos"];
+ } else {
+ $_iv = $this->decryptIV;
+ $_pos = 0;
+ }
+ $_len = strlen($_text);
+ $_i = 0;
+ if ($_pos) {
+ $_orig_pos = $_pos;
+ $_max = ' . $block_size . ' - $_pos;
+ if ($_len >= $_max) {
+ $_i = $_max;
+ $_len-= $_max;
+ $_pos = 0;
+ } else {
+ $_i = $_len;
+ $_pos+= $_len;
+ $_len = 0;
+ }
+ $_plaintext = substr($_iv, $_orig_pos) ^ $_text;
+ $_iv = substr_replace($_iv, substr($_text, 0, $_i), $_orig_pos, $_i);
+ }
+ while ($_len >= ' . $block_size . ') {
+ $in = $_iv;
+ ' . $encrypt_block . '
+ $_iv = $in;
+ $cb = substr($_text, $_i, ' . $block_size . ');
+ $_plaintext.= $_iv ^ $cb;
+ $_iv = $cb;
+ $_len-= ' . $block_size . ';
+ $_i+= ' . $block_size . ';
+ }
+ if ($_len) {
+ $in = $_iv;
+ ' . $encrypt_block . '
+ $_iv = $in;
+ $_plaintext.= $_iv ^ substr($_text, $_i);
+ $_iv = substr_replace($_iv, substr($_text, $_i), 0, $_len);
+ $_pos = $_len;
+ }
+
+ return $_plaintext;
+ ';
+ break;
+ case self::MODE_CFB8:
+ $encrypt = $init_encrypt . '
+ $_ciphertext = "";
+ $_len = strlen($_text);
+ $_iv = $this->encryptIV;
+
+ for ($_i = 0; $_i < $_len; ++$_i) {
+ $in = $_iv;
+ ' . $encrypt_block . '
+ $_ciphertext .= ($_c = $_text[$_i] ^ $in);
+ $_iv = substr($_iv, 1) . $_c;
+ }
+
+ if ($this->continuousBuffer) {
+ if ($_len >= ' . $block_size . ') {
+ $this->encryptIV = substr($_ciphertext, -' . $block_size . ');
+ } else {
+ $this->encryptIV = substr($this->encryptIV, $_len - ' . $block_size . ') . substr($_ciphertext, -$_len);
+ }
+ }
+
+ return $_ciphertext;
+ ';
+ $decrypt = $init_encrypt . '
+ $_plaintext = "";
+ $_len = strlen($_text);
+ $_iv = $this->decryptIV;
+
+ for ($_i = 0; $_i < $_len; ++$_i) {
+ $in = $_iv;
+ ' . $encrypt_block . '
+ $_plaintext .= $_text[$_i] ^ $in;
+ $_iv = substr($_iv, 1) . $_text[$_i];
+ }
+
+ if ($this->continuousBuffer) {
+ if ($_len >= ' . $block_size . ') {
+ $this->decryptIV = substr($_text, -' . $block_size . ');
+ } else {
+ $this->decryptIV = substr($this->decryptIV, $_len - ' . $block_size . ') . substr($_text, -$_len);
+ }
+ }
+
+ return $_plaintext;
+ ';
+ break;
+ case self::MODE_OFB8:
+ $encrypt = $init_encrypt . '
+ $_ciphertext = "";
+ $_len = strlen($_text);
+ $_iv = $this->encryptIV;
+
+ for ($_i = 0; $_i < $_len; ++$_i) {
+ $in = $_iv;
+ ' . $encrypt_block . '
+ $_ciphertext.= $_text[$_i] ^ $in;
+ $_iv = substr($_iv, 1) . $in[0];
+ }
+
+ if ($this->continuousBuffer) {
+ $this->encryptIV = $_iv;
+ }
+
+ return $_ciphertext;
+ ';
+ $decrypt = $init_encrypt . '
+ $_plaintext = "";
+ $_len = strlen($_text);
+ $_iv = $this->decryptIV;
+
+ for ($_i = 0; $_i < $_len; ++$_i) {
+ $in = $_iv;
+ ' . $encrypt_block . '
+ $_plaintext.= $_text[$_i] ^ $in;
+ $_iv = substr($_iv, 1) . $in[0];
+ }
+
+ if ($this->continuousBuffer) {
+ $this->decryptIV = $_iv;
+ }
+
+ return $_plaintext;
+ ';
+ break;
+ case self::MODE_OFB:
+ $encrypt = $init_encrypt . '
+ $_ciphertext = "";
+ $_plaintext_len = strlen($_text);
+ $_xor = $this->encryptIV;
+ $_buffer = &$this->enbuffer;
+
+ if (strlen($_buffer["xor"])) {
+ for ($_i = 0; $_i < $_plaintext_len; $_i+= ' . $block_size . ') {
+ $_block = substr($_text, $_i, ' . $block_size . ');
+ if (strlen($_block) > strlen($_buffer["xor"])) {
+ $in = $_xor;
+ ' . $encrypt_block . '
+ $_xor = $in;
+ $_buffer["xor"].= $_xor;
+ }
+ $_key = \phpseclib3\Common\Functions\Strings::shift($_buffer["xor"], ' . $block_size . ');
+ $_ciphertext.= $_block ^ $_key;
+ }
+ } else {
+ for ($_i = 0; $_i < $_plaintext_len; $_i+= ' . $block_size . ') {
+ $in = $_xor;
+ ' . $encrypt_block . '
+ $_xor = $in;
+ $_ciphertext.= substr($_text, $_i, ' . $block_size . ') ^ $_xor;
+ }
+ $_key = $_xor;
+ }
+ if ($this->continuousBuffer) {
+ $this->encryptIV = $_xor;
+ if ($_start = $_plaintext_len % ' . $block_size . ') {
+ $_buffer["xor"] = substr($_key, $_start) . $_buffer["xor"];
+ }
+ }
+ return $_ciphertext;
+ ';
+
+ $decrypt = $init_encrypt . '
+ $_plaintext = "";
+ $_ciphertext_len = strlen($_text);
+ $_xor = $this->decryptIV;
+ $_buffer = &$this->debuffer;
+
+ if (strlen($_buffer["xor"])) {
+ for ($_i = 0; $_i < $_ciphertext_len; $_i+= ' . $block_size . ') {
+ $_block = substr($_text, $_i, ' . $block_size . ');
+ if (strlen($_block) > strlen($_buffer["xor"])) {
+ $in = $_xor;
+ ' . $encrypt_block . '
+ $_xor = $in;
+ $_buffer["xor"].= $_xor;
+ }
+ $_key = \phpseclib3\Common\Functions\Strings::shift($_buffer["xor"], ' . $block_size . ');
+ $_plaintext.= $_block ^ $_key;
+ }
+ } else {
+ for ($_i = 0; $_i < $_ciphertext_len; $_i+= ' . $block_size . ') {
+ $in = $_xor;
+ ' . $encrypt_block . '
+ $_xor = $in;
+ $_plaintext.= substr($_text, $_i, ' . $block_size . ') ^ $_xor;
+ }
+ $_key = $_xor;
+ }
+ if ($this->continuousBuffer) {
+ $this->decryptIV = $_xor;
+ if ($_start = $_ciphertext_len % ' . $block_size . ') {
+ $_buffer["xor"] = substr($_key, $_start) . $_buffer["xor"];
+ }
+ }
+ return $_plaintext;
+ ';
+ break;
+ case self::MODE_STREAM:
+ $encrypt = $init_encrypt . '
+ $_ciphertext = "";
+ ' . $encrypt_block . '
+ return $_ciphertext;
+ ';
+ $decrypt = $init_decrypt . '
+ $_plaintext = "";
+ ' . $decrypt_block . '
+ return $_plaintext;
+ ';
+ break;
+ // case self::MODE_CBC:
+ default:
+ $encrypt = $init_encrypt . '
+ $_ciphertext = "";
+ $_plaintext_len = strlen($_text);
+
+ $in = $this->encryptIV;
+
+ for ($_i = 0; $_i < $_plaintext_len; $_i+= ' . $block_size . ') {
+ $in = substr($_text, $_i, ' . $block_size . ') ^ $in;
+ ' . $encrypt_block . '
+ $_ciphertext.= $in;
+ }
+
+ if ($this->continuousBuffer) {
+ $this->encryptIV = $in;
+ }
+
+ return $_ciphertext;
+ ';
+
+ $decrypt = $init_decrypt . '
+ $_plaintext = "";
+ $_text = str_pad($_text, strlen($_text) + (' . $block_size . ' - strlen($_text) % ' . $block_size . ') % ' . $block_size . ', chr(0));
+ $_ciphertext_len = strlen($_text);
+
+ $_iv = $this->decryptIV;
+
+ for ($_i = 0; $_i < $_ciphertext_len; $_i+= ' . $block_size . ') {
+ $in = $_block = substr($_text, $_i, ' . $block_size . ');
+ ' . $decrypt_block . '
+ $_plaintext.= $in ^ $_iv;
+ $_iv = $_block;
+ }
+
+ if ($this->continuousBuffer) {
+ $this->decryptIV = $_iv;
+ }
+
+ return $this->unpad($_plaintext);
+ ';
+ break;
+ }
+
+ // Before discrediting this, please read the following:
+ // @see https://github.com/phpseclib/phpseclib/issues/1293
+ // @see https://github.com/phpseclib/phpseclib/pull/1143
+ eval('$func = function ($_action, $_text) { ' . $init_crypt . 'if ($_action == "encrypt") { ' . $encrypt . ' } else { ' . $decrypt . ' }};');
+
+ return \Closure::bind($func, $this, static::class);
+ }
+
+ /**
+ * Convert float to int
+ *
+ * On ARM CPUs converting floats to ints doesn't always work
+ *
+ * @param string $x
+ * @return int
+ */
+ protected static function safe_intval($x)
+ {
+ if (is_int($x)) {
+ return $x;
+ }
+
+ if (self::$use_reg_intval) {
+ return PHP_INT_SIZE == 4 && PHP_VERSION_ID >= 80100 ? intval($x) : $x;
+ }
+
+ return (fmod($x, 0x80000000) & 0x7FFFFFFF) |
+ ((fmod(floor($x / 0x80000000), 2) & 1) << 31);
+ }
+
+ /**
+ * eval()'able string for in-line float to int
+ *
+ * @return string
+ */
+ protected static function safe_intval_inline()
+ {
+ if (self::$use_reg_intval) {
+ return PHP_INT_SIZE == 4 && PHP_VERSION_ID >= 80100 ? 'intval(%s)' : '%s';
+ }
+
+ $safeint = '(is_int($temp = %s) ? $temp : (fmod($temp, 0x80000000) & 0x7FFFFFFF) | ';
+ return $safeint . '((fmod(floor($temp / 0x80000000), 2) & 1) << 31))';
+ }
+
+ /**
+ * Sets up GCM parameters
+ *
+ * See steps 1-2 of https://nvlpubs.nist.gov/nistpubs/Legacy/SP/nistspecialpublication800-38d.pdf#page=23
+ * for more info
+ *
+ */
+ private function setupGCM()
+ {
+ // don't keep on re-calculating $this->h
+ if (!$this->h || $this->hKey != $this->key) {
+ $cipher = new static('ecb');
+ $cipher->setKey($this->key);
+ $cipher->disablePadding();
+
+ $this->h = self::$gcmField->newInteger(
+ Strings::switchEndianness($cipher->encrypt("\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"))
+ );
+ $this->hKey = $this->key;
+ }
+
+ if (strlen($this->nonce) == 12) {
+ $this->iv = $this->nonce . "\0\0\0\1";
+ } else {
+ $this->iv = $this->ghash(
+ self::nullPad128($this->nonce) . str_repeat("\0", 8) . self::len64($this->nonce)
+ );
+ }
+ }
+
+ /**
+ * Performs GHASH operation
+ *
+ * See https://nvlpubs.nist.gov/nistpubs/Legacy/SP/nistspecialpublication800-38d.pdf#page=20
+ * for more info
+ *
+ * @see self::decrypt()
+ * @see self::encrypt()
+ * @param string $x
+ * @return string
+ */
+ private function ghash($x)
+ {
+ $h = $this->h;
+ $y = ["\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"];
+ $x = str_split($x, 16);
+ $n = 0;
+ // the switchEndianness calls are necessary because the multiplication algorithm in BinaryField/Integer
+ // interprets strings as polynomials in big endian order whereas in GCM they're interpreted in little
+ // endian order per https://nvlpubs.nist.gov/nistpubs/Legacy/SP/nistspecialpublication800-38d.pdf#page=19.
+ // big endian order is what binary field elliptic curves use per http://www.secg.org/sec1-v2.pdf#page=18.
+
+ // we could switchEndianness here instead of in the while loop but doing so in the while loop seems like it
+ // might be slightly more performant
+ //$x = Strings::switchEndianness($x);
+ foreach ($x as $xn) {
+ $xn = Strings::switchEndianness($xn);
+ $t = $y[$n] ^ $xn;
+ $temp = self::$gcmField->newInteger($t);
+ $y[++$n] = $temp->multiply($h)->toBytes();
+ $y[$n] = substr($y[$n], 1);
+ }
+ $y[$n] = Strings::switchEndianness($y[$n]);
+ return $y[$n];
+ }
+
+ /**
+ * Returns the bit length of a string in a packed format
+ *
+ * @see self::decrypt()
+ * @see self::encrypt()
+ * @see self::setupGCM()
+ * @param string $str
+ * @return string
+ */
+ private static function len64($str)
+ {
+ return "\0\0\0\0" . pack('N', 8 * strlen($str));
+ }
+
+ /**
+ * NULL pads a string to be a multiple of 128
+ *
+ * @see self::decrypt()
+ * @see self::encrypt()
+ * @see self::setupGCM()
+ * @param string $str
+ * @return string
+ */
+ protected static function nullPad128($str)
+ {
+ $len = strlen($str);
+ return $str . str_repeat("\0", 16 * ceil($len / 16) - $len);
+ }
+
+ /**
+ * Calculates Poly1305 MAC
+ *
+ * On my system ChaCha20, with libsodium, takes 0.5s. With this custom Poly1305 implementation
+ * it takes 1.2s.
+ *
+ * @see self::decrypt()
+ * @see self::encrypt()
+ * @param string $text
+ * @return string
+ */
+ protected function poly1305($text)
+ {
+ $s = $this->poly1305Key; // strlen($this->poly1305Key) == 32
+ $r = Strings::shift($s, 16);
+ $r = strrev($r);
+ $r &= "\x0f\xff\xff\xfc\x0f\xff\xff\xfc\x0f\xff\xff\xfc\x0f\xff\xff\xff";
+ $s = strrev($s);
+
+ $r = self::$poly1305Field->newInteger(new BigInteger($r, 256));
+ $s = self::$poly1305Field->newInteger(new BigInteger($s, 256));
+ $a = self::$poly1305Field->newInteger(new BigInteger());
+
+ $blocks = str_split($text, 16);
+ foreach ($blocks as $block) {
+ $n = strrev($block . chr(1));
+ $n = self::$poly1305Field->newInteger(new BigInteger($n, 256));
+ $a = $a->add($n);
+ $a = $a->multiply($r);
+ }
+ $r = $a->toBigInteger()->add($s->toBigInteger());
+ $mask = "\xFF\xFF\xFF\xFF\xFF\xFF\xFF\xFF\xFF\xFF\xFF\xFF\xFF\xFF\xFF\xFF";
+ return strrev($r->toBytes()) & $mask;
+ }
+
+ /**
+ * Return the mode
+ *
+ * You can do $obj instanceof AES or whatever to get the cipher but you can't do that to get the mode
+ *
+ * @return string
+ */
+ public function getMode()
+ {
+ return array_flip(self::MODE_MAP)[$this->mode];
+ }
+
+ /**
+ * Is the continuous buffer enabled?
+ *
+ * @return boolean
+ */
+ public function continuousBufferEnabled()
+ {
+ return $this->continuousBuffer;
+ }
+}
diff --git a/theme/vendor/phpseclib/phpseclib/phpseclib/Crypt/Common/Traits/Fingerprint.php b/theme/vendor/phpseclib/phpseclib/phpseclib/Crypt/Common/Traits/Fingerprint.php
new file mode 100644
index 0000000..9ca8926
--- /dev/null
+++ b/theme/vendor/phpseclib/phpseclib/phpseclib/Crypt/Common/Traits/Fingerprint.php
@@ -0,0 +1,57 @@
+
+ * @copyright 2015 Jim Wigginton
+ * @license http://www.opensource.org/licenses/mit-license.html MIT License
+ * @link http://phpseclib.sourceforge.net
+ */
+
+namespace phpseclib3\Crypt\Common\Traits;
+
+use phpseclib3\Crypt\Hash;
+
+/**
+ * Fingerprint Trait for Private Keys
+ *
+ * @author Jim Wigginton ' . Strings::base64_encode($p->toBytes()) . "
\r\n" . + '' . Strings::base64_encode($q->toBytes()) . "\r\n" . + '
+ * getPublicKey();
+ *
+ * $plaintext = 'terrafrost';
+ *
+ * $signature = $private->sign($plaintext);
+ *
+ * echo $public->verify($plaintext, $signature) ? 'verified' : 'unverified';
+ * ?>
+ *
+ *
+ * One thing to consider when using this: so phpseclib uses PSS mode by default.
+ * Technically, id-RSASSA-PSS has a different key format than rsaEncryption. So
+ * should phpseclib save to the id-RSASSA-PSS format by default or the
+ * rsaEncryption format? For stand-alone keys I figure rsaEncryption is better
+ * because SSH doesn't use PSS and idk how many SSH servers would be able to
+ * decode an id-RSASSA-PSS key. For X.509 certificates the id-RSASSA-PSS
+ * format is used by default (unless you change it up to use PKCS1 instead)
+ *
+ * @author Jim Wigginton ' . Strings::base64_encode($primes[1]->toBytes()) . "
\r\n" . + '' . Strings::base64_encode($primes[2]->toBytes()) . "\r\n" . + '
+ * echo $des->encrypt(substr($plaintext, 0, 8));
+ * echo $des->encrypt(substr($plaintext, 8, 8));
+ *
+ *
+ * echo $des->encrypt($plaintext);
+ *
+ *
+ * The solution is to enable the continuous buffer. Although this will resolve the above discrepancy, it creates
+ * another, as demonstrated with the following:
+ *
+ *
+ * $des->encrypt(substr($plaintext, 0, 8));
+ * echo $des->decrypt($des->encrypt(substr($plaintext, 8, 8)));
+ *
+ *
+ * echo $des->decrypt($des->encrypt(substr($plaintext, 8, 8)));
+ *
+ *
+ * With the continuous buffer disabled, these would yield the same output. With it enabled, they yield different
+ * outputs. The reason is due to the fact that the initialization vector's change after every encryption /
+ * decryption round when the continuous buffer is enabled. When it's disabled, they remain constant.
+ *
+ * Put another way, when the continuous buffer is enabled, the state of the \phpseclib3\Crypt\DES() object changes after each
+ * encryption / decryption round, whereas otherwise, it'd remain constant. For this reason, it's recommended that
+ * continuous buffers not be used. They do offer better security and are, in fact, sometimes required (SSH uses them),
+ * however, they are also less intuitive and more likely to cause you problems.
+ *
+ * @see \phpseclib3\Crypt\Common\SymmetricKey::enableContinuousBuffer()
+ * @see self::disableContinuousBuffer()
+ */
+ public function enableContinuousBuffer()
+ {
+ parent::enableContinuousBuffer();
+ if ($this->mode_3cbc) {
+ $this->des[0]->enableContinuousBuffer();
+ $this->des[1]->enableContinuousBuffer();
+ $this->des[2]->enableContinuousBuffer();
+ }
+ }
+
+ /**
+ * Treat consecutive packets as if they are a discontinuous buffer.
+ *
+ * The default behavior.
+ *
+ * @see \phpseclib3\Crypt\Common\SymmetricKey::disableContinuousBuffer()
+ * @see self::enableContinuousBuffer()
+ */
+ public function disableContinuousBuffer()
+ {
+ parent::disableContinuousBuffer();
+ if ($this->mode_3cbc) {
+ $this->des[0]->disableContinuousBuffer();
+ $this->des[1]->disableContinuousBuffer();
+ $this->des[2]->disableContinuousBuffer();
+ }
+ }
+
+ /**
+ * Creates the key schedule
+ *
+ * @see \phpseclib3\Crypt\DES::setupKey()
+ * @see \phpseclib3\Crypt\Common\SymmetricKey::setupKey()
+ */
+ protected function setupKey()
+ {
+ switch (true) {
+ // if $key <= 64bits we configure our internal pure-php cipher engine
+ // to act as regular [1]DES, not as 3DES. mcrypt.so::tripledes does the same.
+ case strlen($this->key) <= 8:
+ $this->des_rounds = 1;
+ break;
+
+ // otherwise, if $key > 64bits, we configure our engine to work as 3DES.
+ default:
+ $this->des_rounds = 3;
+
+ // (only) if 3CBC is used we have, of course, to setup the $des[0-2] keys also separately.
+ if ($this->mode_3cbc) {
+ $this->des[0]->setupKey();
+ $this->des[1]->setupKey();
+ $this->des[2]->setupKey();
+
+ // because $des[0-2] will, now, do all the work we can return here
+ // not need unnecessary stress parent::setupKey() with our, now unused, $key.
+ return;
+ }
+ }
+ // setup our key
+ parent::setupKey();
+ }
+
+ /**
+ * Sets the internal crypt engine
+ *
+ * @see \phpseclib3\Crypt\Common\SymmetricKey::__construct()
+ * @see \phpseclib3\Crypt\Common\SymmetricKey::setPreferredEngine()
+ * @param int $engine
+ */
+ public function setPreferredEngine($engine)
+ {
+ if ($this->mode_3cbc) {
+ $this->des[0]->setPreferredEngine($engine);
+ $this->des[1]->setPreferredEngine($engine);
+ $this->des[2]->setPreferredEngine($engine);
+ }
+
+ parent::setPreferredEngine($engine);
+ }
+}
diff --git a/theme/vendor/phpseclib/phpseclib/phpseclib/Crypt/Twofish.php b/theme/vendor/phpseclib/phpseclib/phpseclib/Crypt/Twofish.php
new file mode 100644
index 0000000..bf76563
--- /dev/null
+++ b/theme/vendor/phpseclib/phpseclib/phpseclib/Crypt/Twofish.php
@@ -0,0 +1,816 @@
+
+ * setKey('12345678901234567890123456789012');
+ *
+ * $plaintext = str_repeat('a', 1024);
+ *
+ * echo $twofish->decrypt($twofish->encrypt($plaintext));
+ * ?>
+ *
+ *
+ * @author Jim Wigginton ' . $this->getScreenHelper() . ''; + } + + /** + * Returns the current screen and the x previous lines + * + * @return string + */ + public function getHistory() + { + $scrollback = ''; + $last_attr = $this->base_attr_cell; + for ($i = 0; $i < count($this->history); $i++) { + for ($j = 0; $j <= $this->max_x + 1; $j++) { + $cur_attr = $this->history_attrs[$i][$j]; + $scrollback .= $this->processCoordinate($last_attr, $cur_attr, isset($this->history[$i][$j]) ? $this->history[$i][$j] : ''); + $last_attr = $this->history_attrs[$i][$j]; + } + $scrollback .= "\r\n"; + } + $base_attr_cell = $this->base_attr_cell; + $this->base_attr_cell = $last_attr; + $scrollback .= $this->getScreen(); + $this->base_attr_cell = $base_attr_cell; + + return '
' . $scrollback . ''; + } +} diff --git a/theme/vendor/phpseclib/phpseclib/phpseclib/File/ASN1.php b/theme/vendor/phpseclib/phpseclib/phpseclib/File/ASN1.php new file mode 100644 index 0000000..c4b06a5 --- /dev/null +++ b/theme/vendor/phpseclib/phpseclib/phpseclib/File/ASN1.php @@ -0,0 +1,1513 @@ + + * @copyright 2012 Jim Wigginton + * @license http://www.opensource.org/licenses/mit-license.html MIT License + * @link http://phpseclib.sourceforge.net + */ + +namespace phpseclib3\File; + +use phpseclib3\Common\Functions\Strings; +use phpseclib3\File\ASN1\Element; +use phpseclib3\Math\BigInteger; + +/** + * Pure-PHP ASN.1 Parser + * + * @author Jim Wigginton